DHCP Error - Setting the IP Address

Modified on Tue, 02 Mar 2021 at 10:28 AM

Procedure - Setting the IP Address


In order to to set an IP address you can use a Mobile Phone, Tablet or Computer.


WIFI Stick or WIFI Box - DLS-W / DLB-W


1.  Go to your WIFI Connections

2.  Connect to the datalogger - AP_XXXXXXXXXX

3.  Go to your web browser - Input 10.10.100.254

4.  Select Network, fill in the IP address assigned by the router/network administrator


LAN Stick - DLS-L


1: Connect LAN stick to operational inverter to provide power to LAN stick. Connect one end of an ethernet cable to LAN stick and other end directly to a computer.

2: On the computer, click on the Network Connections and select the Local Connection. Open the Local Connection Status, click on Properties, select internet protocol IPv4(TCP/IPv4).

3: Set a manual IP for the computer using the following information -

IP address :10.10.100.253

Subnet mask:255.255.255.0

Default gateway:10.10.100.100

Click - OK

(The IP of the computer must be with 10.10.100.XXX range to configure the LAN stick) 

4: Once the computer IP is set with the above details open a web browser and navigate to 10.10.100.254 to login to LAN stick admin page.

5. Select Network, fill in the IP address assigned by the router/network administrator

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article