If you wish to download this article as a PDF, please scroll to the bottom of the page or click HERE.
Share this article:
RHI-3P(3-10)K-HVES-5G Parallel Operation
Discover the untapped potential of your solar energy system with the parallel operation option offered by Solis RHI 3 Phase inverters. In this article, we explore how this feature allows users to maximize energy production effortlessly. However, should any issues arise, the Solis support team is readily available to provide assistance and ensure a seamless solar experience. Let's delve into the world of parallel operation and empower users to harness the full power of the sun with confidence in reliable support.
Note: The present scenario is not being displayed accurately on Soliscloud. Our dedicated Soliscloud Support team is actively addressing the issue to ensure that this scenario will be correctly displayed on our Soliscloud platform.
Applicable Devices:
- RHI-3P(3-10)K-HVES-5G
- Solis-EPM3-5G-PLUS
- Solis 3 phase PV inverters
Application Scenario:
The Solis-EPM3-5G-PLUS is installed at the system grid connection point as the sampling unit. And it communicates with multiple RHI-3P(3-10)K-HVES-5G and Solis 3 phase PV inverters to realize the self-use control logic
Below settings must be followed to ensure the correct control logic:
1.EPM
1.1 Transmit ON/OFF
Set to: OFF
Path: Advanced setting →Password :0010→Transmit ON/OFF→OFF
1.2. Address
Set to: 01
Path: Setting→Set address→01
1.3. Inverter Qty Set
Set to: Max number of slave address among all inverters
Path: Advanced setting→Password :0010→Inverter Qty →Set INV Number →Max number of slave address among all inverters
(Example: 3 hybrid inverters in parallel with slave address 02, 04, 06. Set Inverter Qty.Set to 06)
1.4. Set Capacity
Set to: Adding up the “Rated Power” of all inverters under the EPM
Path: Advanced setting→Password :0010→Set Capacity→Adding up the “Rated Power” of all inverters under the EPM
1.5. Set Meter CT
Set to: CT ratio of the external CT
Path: Advanced setting→Password :0010→Set Meter CT→CT ratio of the external CT
(Example: If 100A:5A CT are used, set the CT ratio as 20:1)
1.6. Backflow Power
Set to: Allowed backflow power.
Path: Advanced setting→Password :0010→Backflow Power→Set Power→Allowed backflow power.
1.7. Backflow work mode
Set to: 01
Path: Advanced setting→Password :0010→Backflow work mode→01
1.8. Inverter type
Set to: If there is a hybrid inverter, select “hybrid inverter”; If all with grid tied inverters, choose “PV inverter”
Path: Advanced setting→Password :0010→Inverter Type→Hybrid inverter(If there is a hybrid inverter, select “hybrid inverter”; If all with grid tied inverters, choose “PV inverter”)
1.9.FailSafe ON/OFF
Set to: Run
Path: Advanced setting→Password :0010→FailSafe ON/OFF→FailSafe:RUN
2. Solis 3 phase PV inverters
2.1 Set Address
Set to : Odd Number (01, 03,05, etc). Set to different on different inverters
Path: Setting→Set address→Odd number
2.2 Internal EPM Set
Set to : OFF
Path: Advanced setting→Password :0010→Internal EPM set→Mode Select: OFF
2.3 External EPM Set
Set to: ON
Path: Advanced setting →Password :0010→→External EPM set→5G-EPM →Fail Safe Set: ON
3.Hybrid inverters
3.1 Set Address
Set to : Even Number (02, 04,06, etc). Set to different on different inverters
Path: Setting→Set address→Even number
3.2 Meter Select
Set to: No Meter
Path: Advanced setting→Password:0010→Storage Energy Set→Meter Select→No meter
3.3 Int EPM Set
Set to: OFF
Path: Advanced setting→Password:0010→Int EPM Set→EPM ON/OFF→OFF
3.4 Ext EPM Set
Set to: ON
Path: Advanced setting→Password:0010→Ext EPM Set→Ext EPM ON/OFF→ON→Fail Safe ON/OFF→ON
3.5 Self Use Mode
Set to: ON and Allow grid charging
Path: Advanced setting→Password:0010→Stg Mode Select→Self use→ON→Charging from grid→Allow
We trust that this article has provided valuable insights. Should you encounter any further questions or concerns, please do not hesitate to reach out to your local Solis support team. Your satisfaction is our priority.
Connect with Solis
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article